Jacking And Blocking - Princeton PIGGY BACK PB50 Operator's Manual

9 Lubrication
Grease Fitting, top of tilt
cylinder-1, B
Mast Chains-9, B
Side Shift Blocks-1, B
47
Grease Fitting, bottom of tilt
cylinder-1, B
Grease Fitting, Side Shift
Cylinder-1, B
Side Shift Blocks-1, B
C WARNING
Avoid the risk of injury or death.
Use jack stands when working
on raised truck.
Front Jacking
With forklift in Service Position
Engine Off:
1.Use a hydraulic jack of 5 ton
capacity minimum.
2.Position front jacks under
stabilizer feet.
3.Position jack stands under
carriage.
4.Slowly lower forklift onto
stands.
Rear Jacking
With forklift in Service
Position Engine Off:
1.Use a hydraulic jack of 5 ton
capacity minimum.
2.Position jack under frame at
rear.
3.Position jack stand under
frame.
4.Slowly lower forklift onto
stands.
WARNING
C
Avoid hydraulic line damage.
Do not jack or block forklift
frame near hydraulic lines.

Jacking and Blocking

8