Table of Contents
Advertisement
5 Operation
3WD AND TRAC-LOC SWITCH
Three Wheel Drive (3WD)
With the switch in the lower position, the
forklift will be in 3WD and power is
applied to all three wheels.
3WD IS THE NORMAL OPERATING
MODE.
Trac-Loc
Rock switch toward mast and the rear
wheel will be in locked in.
Use Trac-Loc in slippery conditions.
Continuous Trac-Loc usage adds
heat to hydraulic drive system and
inhibits vehicle turning. Use Trac-
Loc only when necessary.
Important Note:
Disengage Trac-Loc before
starting the PIGGY BACK or
damage to the Hydraulic
System may occur.
19
2 POSITION SWITCH
UP
TRAC-LOC
DOWN
3WD
6 Transport-EASY HITCH
Drive the PIGGY BACK
forward until the forks are
in the fork supports, tilting
the mast forward as you
drive to make sure the
forks are under the front
fork tube.
Tilt the top of the mast fully
to the rear to raise the rear
tire.
Raise the PIGGY BACK
until the hooks are above
the pins.
36
Hide quick links:
Advertisement
Table of Contents
