To Forklift Operators - Princeton PIGGY BACK PB50 Operator's Manual

10 Specifications
DEUTZ ENGINE: See Deutz engine manual)
CAUTION: Do not use ether or starting fluid. Severe non-war-
rantable engine damage will occur.
FUEL: Always use branded grades of diesel fuel having a sulfur
content of below 0.5%. In the case of higher sulfur content, the
periods between oil changes must be shortened.
The following fuel specifications are approved:
DIN 51 601
NATO Codes F54, F75 and F76
BS 2869: A1 and A2 (in case of A2, note sulfur content)
ASTM D 975-81 : 1-D and 2-D
VV-F-800a: DF-A, DF-1 and DF-2
WINTER-GRADE FUEL: At temperatures as low as -15 C (+5 F)
to -20 C (-4 F), kerosene should be mixed with the diesel fuel. The
necessary percentages for admixing are seen in the diagram
below.
51
Operators must become familiar with all forklift controls, proce-
dures, and work areas. Understand what this forklift can do and its
limits. Understand and practice all safety rules.
Before driving a forklift, the user must inspect it completely to
insure safe operation. This is a requirement of OSHA, ANSI, and
ASME.
The operator is also responsible for understanding the environ-
ment the forklift is being operated in. Knowing how to operate the
forklift within their working environment is very important to overall
forklift safety.
Operate your forklift safely; careful driving is your responsibility.
Know your forklift's capabilities and limits. Follow all instructions in
this manual.

To Forklift Operators

4