Forklift Description - Princeton PIGGY BACK PB50 Operator's Manual

3 Forklift Description

REAR DOLLY
STABILIZER PAD AND ARM
SEAT BELT
(With Integrated Brake Interlock)
13
HYDRAULIC FILTER
FUEL FILTER
7-PIN WIRING CONNECTOR
MOTION PEDAL
TAIL LIGHTS
RELEASING BRAKE
THIS MACHINE HAS A BRAKE
IN THE FRONT MOTORS.
To release drive hub brake,
remove cap on the inside of the
hydraulic motor. Screw in a
12mm x 1.75mm x 35mm hex
head bolt with a washer larger
than the hole diameter. Tighten
the bolt to release the brake.
Reverse procedure to make
brakes work after towing and
repairs are completed.
Remove the bolt and install the
cap before operating the PIGGY
BACK. Drive hub will not operate
unless the bolt is removed.
TOWING FORKLIFT
Fasten a chain or cable to tow vehicle around fork bar of forklift. Cable
or chain must have capacity to pull 3 tons.
An operator must be seated on forklift.
7 Moving A Disabled Forklift
42