Operation - Princeton PIGGY BACK PB50 Operator's Manual

6 Transport-EASY HITCH
Retract the carriage to pull
the PIGGY BACK toward
the transport vehicle.
When the carriage is fully
retracted, lower the PIGGY
BACK until the hooks are
fully seated on the pins. Do
not power down.
Note: If tires do not
contact tire pads
before hooks are
fully seated, tire
pads may be
incorrectly installed.
Shut off the PIGGY BACK.
Push the tilt lever forward
to "relax" the PIGGY BACK
tires onto the front tire
pads.
Note: If unit does not
correctly contact the
two position tire
pads, then correctly
remount the tire
pads.
37
UNEXPECTED FORKLIFT MOVEMENT
Avoid the risk of injury, follow this rule.
Do not casually rest foot on motion pedal.
Motion pedal controls speed and direction of travel.
IMPORTANT NOTE:
Your unit may be equipped with a seat belt/brake interlock. The seat belt
must be fastened to release parking brake. you must come to a com-
plete stop before unlatching your seat belt to avoid a potential forward tip
or premature brake wear.
Forklift will not respond to motion pedal until parking brake is released.
Forward
Push front of motion pedal
down and forklift will move for-
ward. The more it is pushed
the faster the forklift will go.
Neutral Position
When the motion pedal is in
the center, the forklift will be in
the neutral position and should
not move.

5 Operation

MOTION PEDAL
WARNING
REMEMBER
Reverse
Push rear of motion pedal down
and forklift will move backward.
The more it is pushed the faster
the forklift will go.
18