Transferring A Phone Number; Using Your Device; Calling - AT&T Wireless Home Phone User Manual

Transferring a Phone Number

Transferring a landline phone number to your Wireless Home
Phone account can take fi ve (5) days or more. Outgoing calls
can be made immediately using your Wireless Home Phone,
however incoming calls will continue through your old service
until the transfer is complete. It is recommended that a phone
be kept connected to your existing home wiring or prior
service to continue to receive incoming calls until the transfer
is complete. To check the status of your transfer, visit
www.att.com/port.
10

Using Your Device

Calling

Making Calls
Using a phone connected to your Wireless Home Phone Base,
place and receive calls as you normally would. The Wireless
Home Phone Base supports both cordless and corded phone
dialing methods.
Note: You will need to dial 10 digits even for local numbers.
Three-Way Calling
While on an existing call, press the Flash (or Talk) key on your
phone to put the fi rst party on hold. When you hear a dial tone,
dial the second parties' number (wait up to four [4] seconds).
When the second party answers, press the Flash (or Talk) key
again to complete the three-way connection. If the second
party does not answer, press the Flash (or Talk) key to end the
connection and return to the fi rst party.
Note: If your phone does not have a Flash (or Talk) key, use the
off-hook mechanism supported by your phone instead.
Call Waiting
You will hear two tones if someone calls while you are already
on a call.
To hold the current call and accept the waiting call, press
the Flash (or Talk) key. You can press the Flash (or Talk) key
anytime to switch back and forth between calls.
To clear the current call and accept the waiting call, enter 1 and
press the Flash (or Talk) key.
To reject (User Busy) the waiting call, enter 0 and press the
Flash (or Talk) key.
Notes:
• Your Wireless Home Phone Base comes with standard three-
way calling and call waiting. Operation of these features will
vary depending on your home phone equipment.
• If your phone does not have a Flash (or Talk) key, then use the
off-hook mechanism supported by your phone.
Getting Started Using Your Device 11