Error Messages; Sales And Support Information; Optional Accessories - Panasonic Diga DMR-ES10EB Operating Instructions Manual

Error messages

On the television
Cannot finish recording
completely.
Cannot playback.
TV system is different from the
setting.
To playback, please change
the TV System in SETUP.
Cannot record on the disc.
Unable to format.
Please check the disc.
Cannot record. Disc is full.
Cannot record. Maximum
numbers of titles exceeded.
Error has occurred. Please
press ENTER.
No disc
Please change the disc.
This is a non-recordable disc.
This disc is not formatted properly.
5
On the unit's display
REMOTE DVD
(" " stands for a number.)
HARD ERR
NO READ
PROG FULL
SELF CHECK
UNSUPPORT
UNFORMAT
U59
U99
X HOLD

Sales and Support Information

Customer Care Centre
•
For UK customers: 08705 357357
•
For Republic of Ireland customers: 01 289 8333
•
Visit our website for product information
•
E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
•
Order accessory and consumable items for your product with ease
and confidence by phoning our Customer Care Centre Monday-
Friday 9:00am-5:30pm. (Excluding public holidays)

Optional Accessories

Product numbers correct as of January 2005. These may be subject to change.
DVD-RAM 9.4 GB, double-sided, type 4 cartridge: LM-AD240ME (compatible with high speed recording 5X)
4.7 GB, single-sided, type 2 cartridge: LM-AB120ME (compatible with high speed recording 5X)
4.7 GB, single-sided, non-cartridge:
RQT8016
44
DVD-R 4.7 GB, single-sided, non-cartridge:
•
The programme was copy-protected.
•
The disc may be full.
•
There are already 99 recorded titles (
•
You tried to play a title recorded using a different encoding system from that of the TV system
currently selected on the unit.
Alter the "TV System" setting on this unit to suit.
•
The disc may be dirty or scratched.
•
Create space by erasing any unnecessary titles.
(Even if you erase recorded content from the DVD-R or the +R, there is no increase in disc space.)
•
Use a new disc.
•
Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
("SELF CHECK" appears on the unit's display).
•
The disc may be upside down.
•
There may be a problem with the disc. Press [; OPEN/CLOSE] on the main unit to remove it
and check it for scratches or dirt. (The unit turns off automatically after you open the tray.)
•
The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R,
DVD-RW (DVD-Video format) or +R.
•
You inserted an unformatted DVD-RAM or DVD-RW. Format the disc with this unit.
•
The operation is prohibited by the unit or disc.
•
The remote control and main unit are using different codes. Change the code on the remote control.
•
If there is no change after turning the unit on and off, consult the dealer where the unit was purchased.
•
The disc is dirty or badly scratched. The unit cannot record, play, or edit.
•
This message may appear when the lens cleaner has finished cleaning.
Press [; OPEN/CLOSE] on the main unit to eject the disc.
•
There are already 16 timer programmes. Delete unnecessary timer programmes.
•
There was a power failure or the AC plug was disconnected while the unit was on. The unit is
carrying out its recovery process. Wait until the message disappears.
•
If "Quick Start" is set to "On", "PLEASE WAIT" is displayed while the unit is carrying out its
recovery process. You cannot operate the unit while "PLEASE WAIT" is displayed.
•
You have inserted a disc the unit cannot play or record on.
•
You have inserted a DVD-RAM or DVD-RW that is unformatted or recorded on other equipment.
•
The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Select a position with good ventilation when installing the unit. Do not block the vent on the rear of the unit.
•
The unit fails to operate properly. Press [^/I] on the main unit to switch the unit to standby.
Now press [^/I] on the main unit again to turn the unit on.
•
The Child Lock function is activated.
•
Press and hold [ENTER] and [RETURN] simultaneously until "X HOLD" disappears.
LM-AD240LE
LM-AB120LE
LM-AF120ME (compatible with high speed recording 5X)
LM-AF120LE
LM-RF120ME (compatible with high speed recording 8X)
LM-RF120LE
49 recorded titles).
+R
RAM -RW(V)
Press and hold [ENTER] and the indicated number button
at the same time for more than 2 seconds.
•
Or go on line through our Internet Accessory ordering application
at www.panasonic.co.uk
•
Most major credit and debit cards accepted.
•
All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
•
It couldn't be simpler!
•
Also available through our Internet is direct shopping for a wide
range of finished products, take a browse on our website for further
details.
(compatible with high speed recording 3X)
(compatible with high speed recording 3X)
(compatible with high speed recording 3X)
(compatible with high speed recording 4X)
Page
—
—
—
39
5
23, 29, 32
—
—
—
5
4, 5
33
—
15
—
5
—
21
—
—
4, 5
33
—
—
40