Error Messages - Panasonic Diga DMR-ES35V Operating Instructions Manual

Error messages

On the television
Authorization Error
Cannot finish recording
completely.
Cannot playback.
TV system is different from the
setting.
To playback, please change the TV
System in Setup.
Unable to format.
Please check the disc.
Cannot record. Disc is full.
Cannot record. Maximum number
of titles exceeded.
Cannot record to the disc.
TV system of the disc is different
to the setting in Setup.
Error has occurred. Please press
ENTER.
No Disc
No cassette.
Now recording on DVD.
To watch pictures on VHS, use
DVD/VHS COMMON OUT, and
switch to an appropriate AV
channel on your TV.
Please set clock.
The cassette is write-protected.
This is a non-recordable disc.
Cannot record.
This disc is not formatted properly.
To watch pictures on VHS, use
DVD/VHS COMMON OUT, and
switch to an appropriate AV
channel on your TV.
Rental Expired
Video system of the disc is
different.
≥You are trying to play a DivX VOD contents that was purchased with a different registration code.
You cannot play the contents on this unit.
≥The programme was copy-protected.
≥The disc may be full.
≥The maximum number of times you can record the programme is exceeded.
≥[RAM] [-R] [-R]DL] [-RW‹V›] There are already 99 recorded titles ([+R] [+R]DL] [+RW] 49 recorded
titles).
≥You tried to play a title recorded using a different encoding system from that of the TV system
currently selected on the unit.
Alter the "TV System" setting on this unit to suit.
≥The disc may be dirty or scratched.
≥[RAM] [-RW‹V›] [+RW] Create space by deleting any unwanted titles.
Even if you delete recorded content from the DVD-R or +R, there is no increase in disc space.
Available recording space on a DVD-RW (DVD-Video format) or +RW increases when the title
recorded last is deleted. (The recording space may increase slightly when other titles are deleted.)
≥Use a new disc.
≥The disc contains video contents of a different video system. Change the "TV System" settings in
the Setup menu.
≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
("U88" appears on the unit's display).
≥You have not inserted a disc. Correctly insert a disc that the unit can play.
≥A video cassette is not inserted when recording programmes. Insert a video cassette with an
accidental erasure prevention tab.
≥It is possible to playback the VHS while recording on DVD. You can watch the VHS by connecting
the unit to the TV with the DVD/VHS COMMON terminals.
≥The clock is not set. Set the clock.
≥A video cassette without a secure accidental erasure prevention tab is inserted when recording
programmes. Use a video cassette with a secure accidental erasure prevention tab.
≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R,
DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW.
≥You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW. Format the disc with the
unit.
≥The TV system set on the unit and the signal of the video contents of the video cassette being
played is different. Connect the unit to the TV with the DVD/VHS COMMON terminals.
≥The DivX VOD contents has zero remaining plays. You cannot play it.
≥The input signal is different from the settings of this unit. Change the "TV System" settings in the
Setup menu.
≥The operation is prohibited by the unit or disc.
Page
29
–
–
–
–
59
8
27, 53
–
59
–
17
17
12
61
17
6
55
12
29
59
–
63
RQTV0136