Navigation; Using Remote Bass Level Control/Blast - Kicker LivinLoud SX Series Class D SX1250.1 Owner's Manual

USING THE REMOTE BASS LEVEL CONTROL & BLAST
You can use the Remote Bass Level Control to control the
output of your amplifier from the front of the car.
Mount the controller by simply screwing the metal bracket
to the chosen location and then slide the housing onto the
bracket until it snaps into place.
Route the cable from the controller to the BLAST input jack
on the amplifier chassis. That's it.
If you wish to control more than one amplifier with your
remote, you will simply need to use a RJ45 cable (not supplied
but available at any Radio Shack, computer store or electronics
center) to connect the BLAST output jack of the first amp to
the BLAST input jack of the next amplifier.
14
SX .1 Series Amplifiers
BACK VIEW Mounting Surface
SIDE VIEW
SUPPLIED
CABLE
SOURCE UNIT
AMP STRAPPING
OPTIONAL
RJ45 CABLE
AMP STRAPPING
OPTIONAL
RJ45 CABLE
To Next Amplifier

Navigation

Your KICKER SX series amplifier uses the latest in Digital DSP
control and provides you with valuable operational informa-
tion about your amplifier, real-time diagnostics and a full
multi-level menu-driven operating system to access and
adjust your amplifier.
The menu system is designed in layers. There is a starting
point and you keep drilling down until you get to the menu
item you want to view or change. This menu tree is an
example of how the SX menu structure is set up.
NOTE: Not all the menus and menu items are shown below.
DEFAULT
SCREEN
MAIN MENU
* SYSTEM
GAIN
SYSTEM MENU
EQ
VOLT NOW
LO-PASS
VOLT MIN
HI-PASS
VOLT MAX
∝
TEMP NOW
TEMP MAX
RUN TIME
SICK BAY
∝
SICK BAY MENU
CURRENT
HISTORY
∝
SX .1 Series Amplifiers
As you can see there can be an infinite number of menu
levels and each one of these menu levels can have an infinite
number of its own items.
Navigating this simple menu
ESC HOME
structure is very easy using the 5-way
keypad.
You use the UP and DOWN keys to scroll through the
available menu items, and the key is used to select that
ENT
menu item. The ESC key backs you up one menu level from
where you are, and the key can return you all the
HOME
way to MAIN MENU by pressing and holding it for 1.5 seconds.
For example let's begin at the DEFAULT SCREEN; our goal is
to get to the HISTORY menu. Pressing the ENT key would get
us to MAIN MENU. Now use the and
UP
DOWN keys to scroll to SYSTEM, and
then press the ENT key. Now you are
in the SYSTEM MENU. Using the and
UP
ESC
DOWN keys again you scroll to SICK
BAY and press the key. You are
ENT
now in the SICK
BAY MENU. Use the UP and
keys again to scroll to HISTORY and then
press the ENT key. That's it! You are
there.
ESC HOME ENT
This is how you view information
and change settings in your KICKER SX amplifier.
∝
ENT
HOME
ENT
DOWN
15