Kicker LivinLoud SX Series Class D SX1250.1 Owner's Manual page 10

MENU - This menu item contains many diagnostic
SYSTEM
tools and first time setup options. Use the and
UP
arrow keys to scroll through the options and press ENT
select. Press the ESC key to return to the SYSTEM menu.
1.)
Volt Now - Displays the current voltage at the
amplifiers +12 volt terminal.
2.) - Displays the lowest voltage seen at the
Volt Min
amplifiers +12 volt terminal since being installed.
3.) - Displays the highest voltage at the
Volt Max
amplifiers +12 volt terminal since being installed.
4.)
Temp Now - Displays the current temperature of
the amplifier.
5.)
Temp Max - Displays the highest temperature the
amplifier has reached since being installed.
6.)
Run Time - Displays the total time the amplifier
has been powered up since installation in 1/10th of
an hour increments
7.)
Sick Bay - Contains several
diagnostic tools. Once in this menu
you use the UP and DOWN keys to
scroll through CURRENT , HISTORY and
options. Press the
PINK NOISE ENT
ESC HOME
key to select.
18
SX .1 Series Amplifiers
7a.)
CURRENT shows amplifiers current status or fault
DOWN code. The 6 possible codes are:
to
- No problem, normal operation.
normal
- Thermal cutoff protection engaged.
thermal
- Short circuit protection engaged.
short
- High voltage protection engaged.
Hi-Volt
- Faulty or blown power fuse.
FUSE
- Amp requires service by KICKER.
SERVICE
When you are done viewing
the current status press the
key to return to the SICK
ESC
BAY menu.
7b. )
HISTORY logs the last 5 fault codes and how
long ago they happened when
compared to the RUN TIME log.
Use the and
UP DOWN
keys to select the HISTORY log
entry you want to view.
Press and hold the key
ENT
to view the time it happened.
When you are done viewing
ENT
the history press the ESC key.
SICK BAY - cont
7c.)
PINK NOISE
to test operation of the amplifier
Use the
keys to select
NOISE OFf
When the PINK NOISE is ON
the LEFT
in the ISIS VFD will blink on
ESC HOME ENT
and off.
When you are done using the
PINK NOISE generator press the
key to return to the SICK
ESC
BAY menu.
ESC HOME ENT
NOTE...
If you exit the SICK BAY menu with the PINK NOISE generator
still on, the LEFT
blinking as a reminder.
ESC HOME
ENT
ESC HOME ENT
8.)
Amp Name
your KICKER SX amplifier. This name will replace the model
is a built in pink noise generator
name in the DEFAULT screen. If you change your mind and
do not want to change the name, press and hold the
HOME
and
UP DOWN
NOISE ON or
.
The
ESC HOME ENT the cursor left or right to select
which character to change.
and RIGHT indicators
AMP1 AMP2
LOCK LEFT SYS RIGHT MUTE
GAIN EQ LPF HPF PHASE KOMP
noise on
MEM-1 MEM-2 MEM-3 MEM-4
Use the
change the character displayed
(A, B, C...1, 2, 3...etc)
ESC HOME ENT
When you are finished press and
hold the
seconds to save your new
and RIGHT ISIS VFD indicators will remain
amplifier name.
SX .1 Series Amplifiers
- Here you can assign a unique name to
key for 1.5 seconds BEFORE making any changes.
ESC and ENT keys move
ESC HOME ENT
UP and DOWN keys to
ESC HOME ENT
PRESS &
HOLD
HOME key for 1.5
ESC HOME ENT
19