Kicker LivinLoud SX Series Class D SX1250.1 Owner's Manual page 15

MENU - Here you can lock down your amplifier to
Security
prevent any access to the settings. The DEFAULT screen is still
active and you can select any of the four presets... but that is
it!
Press the ENT key to enter the
ESC HOME
SECURITY menu.
Use the UP and DOWN keys to
select LOCK IT UP or DON'T LOCK
and then press the key to
ENT
ESC HOME
accept your setting.
If you selected LOCK IT UP the display will now show
and the indicator will be on . The menus
UNLOCK LOCK
are now locked.Press the ESC key to return to the
DEFAULT scrolling screen.
AMP1 AMP2
LOCK LEFT SYS RIGHT MUTE
GAIN EQ LPF HPF PHASE KOMP
unlock
MEM-1 MEM-2 MEM-3 MEM-4
If you selected then you will return to the
DON'T LOCK
MAIN menu and the amplifier will remain unlocked.
NOTE...
While your amplifier is in lock down you will notice the
indicator on the ISIS VFD display is lit. This indicates your
amplifier is locked down and will require a code to unlock it
before any adjustments can be made.
28
SX .1 Series Amplifiers
UNLOCK AMPLIFIER
You do remember your lock code right? You better because
that is now the only way in! If you have not changed it then it
is still at the factory default of .
123
ENT
To unlock your amplifier press the
key. The display will show
ENT
UNLOCK . Press the ENT key again.
ESC
You will now enter your code to
unlock the amplifier.
ENT
The ESC and ENT keys move the
blinking cursor left or right to select
ESC
which character to enter.
Use the and keys to
UP DOWN
enter the character.
ESC
( , , ... , , ...etc)
A B C 1 2 3
When you are finished press and hold
ESC
the key for 1.5 seconds to
HOME
enter your unlock code.
LOCK
If the code is correct the amp will unlock and drop you back
into the MAIN menu. If not, then read on...
UNLOCK AMPLIFIER - cont.
If you enter the wrong code the display will flash the mes-
sage and then return you to
BAD CODE
AMP1
LOCK
2 Times GAIN EQ LPF HPF
bad code
MEM-1
AMP1
HOME ENT
LOCK
GAIN EQ LPF HPF
unlock
MEM-1
Press the key to enter your
ENT
lock your code again.
HOME ENT
Enter your code again making sure to place the correct
character in the correct position in the display. Blank spaces
count as part of the code so be sure you are entering it
correctly.
HOME ENT
Press and hold the HOME
found your error then the amp will unlock. If not, the flashing
BAD CODE will greet you and you can try again.
HOME ENT
If you have tried several times (several is defined as more
than 3...less than 10) and you still can not unlock your
amplifier, this more than likely means means you have
forgotten your lock code.
You will need to call KICKER directly at (405) 624-8583 to
handle this situation. You will need your amplifier's serial
number AND your receipt as the guys and gals answering the
screen. phone will need this information from you to help you out.
UNLOCK
AMP2
LEFT SYS RIGHT MUTE So...before you call, gather this information up and have it
PHASE KOMP
ready to save us some time on the phone. Cool? Cool!
MEM-2 MEM-3 MEM-4
Better yet, take the time RIGHT NOW to fill out the first page
AMP2
LEFT SYS RIGHT MUTE
PHASE KOMP in this manual and STAPLE your receipt to it. That way if or
when you need service (like forgetting your lock code) you will
MEM-2 MEM-3 MEM-4
have all the information you need right there in front of you.
ESC HOME ENT
key and try again. If you have
SX .1 Series Amplifiers
29