Vfd Display - Kicker LivinLoud SX Series Class D SX1250.1 Owner's Manual

ISIS
ISIS
Meet the interface (Indicate Status & Input Settings).
ISIS
The (pronounced eye-sis) allows you to view the cur-
rent conditions and settings of your amplifier as well as
ISIS
change the many user-adjustable settings.The
consists of the VFD (Vacuum Fluorescent Display) and the nine
soft touch buttons that make up the KEYPAD.
ISIS
AMP1 AMP2
VFD
LOCK LEFT SYS RIGHT MUTE
GAIN EQ LPF HPF PHASE KOMP
* kicker
MEM-1 MEM-2 MEM-3 MEM-4
ISIS
KEYPAD
M1 M2 M3 M4
ESC HOME ENT
4
SX .1 Series Amplifiers

VFD Display

AMP1
LOCK LEFT SYS RIGHT
GAIN EQ LPF HPF PHASE
* kicker
system
MEM-1 MEM-2 MEM-3
Here is a brief description of the indicators found on the
VFD.
AMP1 - Indicates amplifier 1 is selected for adjustment. Only
available in four channel amps.
*
AMP2 - Indicates amplifier 2 is selected for adjustment.
Only available in four channel amps.
- Indicates the amplifier controls are locked out and
LOCK
not usable.
- Indicates an action or adjustment of the left channel.
LEFT
- Indicates you are in the system menu.
SYS
- Indicates an action or adjustment of the right
RIGHT
channel.
- Indicates you are in the mute menu or the mute
MUTE
function is active.
VFD DISPLAY - cont
GAIN - Indicates you are in the gain menu.
AMP2
MUTE
- Indicates you are in the equalizer menu.
EQ
KOMP
*
- Indicates you are in the low pass filter menu.
LPF
- Indicates you are in the high pass filter menu.
HPF
MEM-4
PHASE - Indicates you are in the phase menu.
KOMP - Indicates you are in the Kompressor menu.
MEM-1 - Memory preset 1 activated.
- Memory preset 1 activated.
MEM-2
- Memory preset 1 activated.
MEM-3
MEM-4 - Memory preset 1 activated.
KEYPAD
The keypad consists of nine buttons that allow you to adjust
your amplifier.
M1 - Used to select memory preset 1 or to store cur-
M1
rent settings into preset 1.
- Used to select memory preset 2 or to store
M2
M2
current settings into preset 2.
- Used to select memory preset 3 or to store
M3
M3
current settings into preset 3.
M4 - Used to select memory preset 4 or to store
M4
current settings into preset 4.
ESC - Used to exit the current menu.
ESC
ENT - Used to enter the selected menu.
ENT
HOME - Used to return to the Main menu and
HOME
other functions explained later.
UP - Used to advance up through menu selections
and/or adjust amplifier controls.
- Used to advance down through menu
DOWN
selections and/or adjust amplifier controls.
These controls and their usage will be explained later with
more detail in each menu usage section.
SX .1 Series Amplifiers
5