Kicker LivinLoud SX Series Class D SX1250.1 Owner's Manual page 12

16.)
Reset Amp - This option resets all adjustable
settings back to their original factory defaults.
Use the and keys to
UP DOWN
select SKIP RESET or DO RESET and
then press the key to perform
ENT
ESC HOME
the selected action.
17.)
About - This menu item will display information
about the DAP (Digital Audio Processor) hardware, software
and build date.
Use the and keys to
UP DOWN
view the DSP Version, Software Version,
Hardware Version and Build Date. Press
the ESC key to return to the MAIN
ESC HOME
ENT
menu.
22
SX .1 Series Amplifiers
MENU - Here is where you adjust your amplifier's gain
Gain
control settings.
Press the key to enter the GAIN
ENT
adjustment menu.
ESC
ENT
Now use the and keys
UP DOWN
to increase or decrease the gain of
the amplifier in .5 dB increments from
0 dB to +12 dB. ( .0 to 12.0 )
ESC
Press the ESC key to return to the
MAIN menu when finished adjusting
the gain control.
ESC
NOTE...
While adjusting the GAIN you will notice the
on the ISIS VFD display is lit. This indicates you are in the
GAIN menu.
MENU - Here you can adjust the single band parametric
EQ
equalizer. Your options are
boost/cut .
Press the key to enter the EQ
ENT
HOME ENT
adjustment menu.
Use the and
UP DOWN
scroll through frequency
and boost/cut and press the
key to select.
HOME ENT
FREQUENCY selects the center frequency of the EQ and can
be set at any 1 Hz spaced frequency from
HOME ENT
Use the UP and DOWN
select your frequency. Press the
ESC to return to the EQ menu.
indicator
gain
BANDWIDTH (better known as Q) can be set from
.5 increments. In simple terms, lower Q effects more
frequencies around the center frequency while higher Q
effects fewer frequencies around the center frequency.
Use the UP and DOWN
select your Q value. Press the
to return to the EQ menu.
BOOST/CUT is how much you want to boost or cut the
, and equalizer and has a range of
frequency bandwidth
steps.
Use the
UP
ESC HOME ENT
boost or cut the EQ and then press
the key to return to the EQ
ESC
menu.
keys to
, bandwidth When you are done adjusting the
ENT EQ press the ESC
ESC HOME ENT
EQ
frequency
boost/cut option menu to return to
the MAIN menu.
NOTE...
20 Hz - 200 Hz .
While adjusting the EQ you will notice the
the ISIS VFD display is lit. This indicates you are in the EQ
keys to
menu.
ESC HOME
ENT
.5 to 10 in
keys to
ESC
ESC HOME ENT
SX .1 Series Amplifiers
to in .5 dB
-18 dB + 18 dB
and keys to
DOWN
ESC HOME
ENT
key while in the
, and
bandwidth
ESC HOME ENT
indicator on
EQ
23