Dtc "22" (C1622): Abs Actuator Circuit Malfunction (F) (An400A/Zak9) - Suzuki AN400 Supplementary Service Manual

4E-36 ABS:

DTC "22" (C1622): ABS Actuator Circuit Malfunction (F) (AN400A/ZAK9)

• Wire harness discontinuity
• Front wheel locking, etc.
Troubleshooting
NOTE
After repairing the trouble, clear the DTC using SDS tool. Refer to "DTC (Diagnostic Trouble Code)
Deleting (AN400A/ZAK9)" (Page 4E-25).
Step
1 1) Raise the front wheel off the ground and support the
motorcycle with a jack or wooden block.
2) Inspect the dragging of the front brake.
Is there any dragging in the front brake?
2 1) Inspect the clearance between the front wheel speed
sensor and sensor rotor using the thickness gauge.
Special tool
(A): 09900–20803 (Thickness gauge)
(B): 09900–20806 (Thickness gauge)
Wheel speed sensor – Sensor rotor clearance
0.36 – 1.62 mm (0.014 – 0.064 in)
Is the clearance OK?
Possible Cause
Action
I905H1450033-01
(A), (B)
I905H1240005-02
Yes
Inspect the front brake
master cylinder and the
calipers.
Go to Step 3.
B905H14504005
No
Go to step 2.
Adjust the clearance.