Front Wheel Speed Sensor Routing Diagram (AN400A/ZAK9)
"F"
"B"
1. Clamp
2. Leg shield brace
3. Front wheel speed sensor
"A": Pass the sensor lead wire inside of leg shield brace.
"B": Clamp the white taping point of sensor lead wire and the
brake hose.
"C": Pass the sensor lead wire between front fender and front
fork. Pass the sensor lead wire in front of the front fender
mounting bolt.
2
"G"
3
1
"A"
"B"
1
"D"
"H"
"D": Clamp the white taping point of sensor lead wire and the protector of brake hose.
"E": Clamp the white taping point of sensor lead wire and the brake hose sleeve.
"F": Clamp the protector of sensor lead wire and the brake hose sleeve.
"G": Cut off the excess end of clamp.
"H": Outside marking.
ABS:
B905H14502003
1
"E"
1
"C"
I905H1450071-02
4E-9