Avigilon H3-DP1 User Manual page 9

1. Select a camera from the Port drop down list.
NOTE: The PTZ controls are only displayed when the camera is
displayed by itself.
2. To move the camera field of view, click one of the directional
buttons on the far left.
3. To control the camera's Zoom, Iris or Focus, click the + or -
buttons.
4. For Presets, you can perform any of the following:
• To add a preset, move the camera's field of view into
position then give the preset a name and click Set.
• To use a preset, select a name or number from the
drop down list and click Go To.
5. For Patterns, you can perform any of the following:
• To record a pattern, select a number from the drop
down list then click Record. Use the directional buttons
to move the camera and create the pattern. When you
are done, click Stop.
• To run a pattern, select a number from the drop down
list and click Run.
6. To activate an auxiliary command, select an Aux# from the
drop down list and click Start. When you are finished, click
Stop.
5