Avigilon H3-DP1 User Manual page 13

1. Use the Zoom controls to adjust the camera's zoom
position.
2. If the camera has a built-in auto focus feature, you can
select the Continuous Focus option to enable the camera
to focus itself whenever the scene changes.
3. To manually focus the camera, select Open in the Iris drop
down list then use the Focus buttons to focus the camera.
The left arrow buttons focus the camera towards Zero (0),
and the right arrow buttons focus the camera towards
Infinity. Click the Auto Focus button to enable the camera
to automatically focus once.
NOTE: Once the focus is manually set, it will not change.
4. To adjust the video image, make changes to any of the
following settings as required.
Option
Exposure
Iris
IR Cut Filter
Flicker Control
Backlight
Compensation
Description
You can allow the camera to control the exposure by
selecting Automatic
exposure rate.
NOTE: Increasing the manual exposure time
may affect the image rate.
You can allow the camera to control the iris by
selecting Automatic, or you can manually set it to
Open or Closed.
You can allow the camera to control the infrared cut
filter by selecting Automatic, or set the camera to
Color or Monochrome mode.
If your video image flickers because of the fluorescent
lights around the camera, you can reduce the effects
of the flicker by setting the Flicker Control to the same
frequency as your lights. Generally, Europe is 50Hz
and North America is 60Hz.
If your scene has areas of intense light that cause the
overall image to be too dark, change the Backlight
Compensation value until you achieve a well exposed
image
,
or you can set a specific
9