Basic Function; Wiring Diagram; Troubleshooting - Planet Audio P9640B User Manual

Bluetooth-enabled double-din dvd/mp3/cd receiver with 6.2" widescreen touchscreen tft digital monitor usb and sd memory card port and front panel aux input
Hide thumbs Also See for P9640B:
Table of Contents

Advertisement

BASIC FUNCTION

1.
/ SRC button
Press this button shortly to power on, press this button longer to power off.
In normal situation, press SOURCE button can return to the main menu.
2. IR
To receive infrared signal from the remote control.
3. EQ button
In a source mode, press the button to enter equalizer setup.
4. MENU button
Press this button to back to the main menu.
5. VOL / MUTE button
Rotate the button to adjust volume level
Press this button to shut off sound output, repress this button to resume sound output;
Press this button longer to turn on/off TFT LCD display.
6. SD
Insert SD card, the unit will play the files automatically.
7. Dual (front and rear) USB
Insert USB removable device so as to read audio/video files.
Warning: You can only use either front or rear USB at a time. Never connect both
front and rear USB at the same time! This could cause malfunctions.
8. Dual (front and rear) AUX
To input external audio.
Warning: You can only use either front or rear AUX at a time. Never connect both
front and rear AUX at the same time.
9. RESET
Press this button and this unit will be restored to the initial state.
10.
At radio state, short press this button to manual seek radio frequency to backward
direction; long press this button to automatically seek radio frequency to backward
direction; At voice playing state, short press this button to select the previous song;
In the playback, press rewind function can be realized.
11.
At radio state, short press this button to manual seek radio frequency to backward
direction; long press this button to automatically seek radio frequency to backward
direction; At voice playing state, short press this button to select the next song;
In the playback, press fast forward function can be realized.
.
03
This player is equipped with ISO standard connector, please follow below instruction:
Red - ACC ON (+12V)
Yellow – 12 V Constant
Black – Ground wire
Blue - Power Antenna / Remote Amp Turn On
Orange – Back-Up Camera Trigger (+)
TROUBLE SHOOTING
PROBLEM
CAUSE
Check fuse
Cannot power on
Some factors cause MPU
wrong operation
After ignition switch
Change battery or fuse
off, setting
information all lose
Poor performance
Weak signal
of radio station
Cannot load disk
There is a disk inside
Disc is scratched
Put wrong side of disc into
Cannot play disc
the unit
Lens is dirty
Cannot switch
There is only one language/
language/subtitle
subtitle in disc
Other factors cause MPU
No image
wrong operation
Cannot watch
It's not allowed to watch image
image during
during driving
driving

WIRING DIAGRAM

Grey/Grey black - Right front speaker (+/-)
White/White black - Left front speaker (+/-)
Purple/Purple black - Right rear speaker (+/-)
Green/Green black - Left rear speaker (+/-)
Parking Brake (-)
SOLUTION
Change fuse same as the old one
Press RES button on the panel by penpoint,
then, power on
Reset information and save
Move the car to another place, then research
Remove disc before inserting another one
Change new disc
Insert in the disk with sign side up
Clean lens by lens clean disc
If disc is not with multi-language/subtitle, it
cannot switch language/subtitle
Press RES button on the panel by penpoint,
then, power on
Park the car in a safe place, put the car stall
in " P " postion, pull up the hand brake,
parking brake wire must be grounded
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents