Basic Operations; Parking Brake; Mute; Power On / Off - Planet Audio PNV9680 User Manual

Parking Brake

• When the "BRAKE" cable is connected to the brake switch, the display on the TFT monitor will
display video only when the vehicle is applied.
• Parking brake function is overridden when the video source is set to REVERSE.
• When the parking brake inhibit is active, the front monitor displays warning information,
preventing the driver f rom watching content while driving. Rear video screens are not af f ected.

Mute

/ VOL /
Press [
volume. [ ] is displayed on the LCD. Adjusting the volume or using any of the audio setup
features cancels the mute function.

Power On / Off

/ VOL /
Press the [
unit light up f or a moment and the current mode status appears in the LCD.
Press and hold the [

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through
the Setup menu.

Playing Source Selection

Press the [ M ENU ] button on the f ront panel to change between
available playing sources. The playing mode is displayed on the
screen.
1. or :: Touch this page button to view the first or second
page of on-screen buttons
2. Function icons
3. Clock
4. Touch for quick access to Audio level settings

Volume Adjustment

To increase or decrease the volume level, turn the [
MUTE ] knob on the front panel. The volume ranges from "0"to "50".
The LCD or TFT screen displays the volume level for 3 seconds.

Audio Menu

The Audio Control feature allows you to easily adjust your audio
system to meet the acoustical characteristics of your vehicle, which
vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the
cabin equalizer.

Basic Operations

MUTE] knob to mute the volume from the unit. Press again to restore the
MUTE] knob on the unit to turn the unit on. The buttons on the f ront of the
/ VOL /
MUTE ] knob to power of f the unit.
/ VOL /
7
1 2 3
4
1