Remote Control Operation; Audio Setting; Video Setting; Radio Setting - Planet Audio P9640B User Manual

Remote Control Operation

POWER ON/OFF AMS / RPT
MUTE TITLE
SOURCE AUDIO
EQ GO TO
SEEK+ / SEEK- SUBTITLE
VOL+ / VOL- PBC
SEL UP / DOWN / L / R ENTER
LOUD SLOW
BAND / P / N ANGLE
LOC / RDM SETUP
STOP OSD
PLAY / PAUSE ZOOM
ST / PROG MENU
0-10+ DSP
1. POWER Button
Press once to switch on, press again to
switch off.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
3. SOURCE Button
Press this button to change mode.
4. EQ Button
Press this button to choose POP、ROCK、
CLASSIC、EQ off.
5. SEEK+ ( ) / SEEK- ( ) Button
In normal playback MP3、USB、SD songs,
Press this button to previous song or next
song.
6. VOL+ ( ) / VOL- ( )
Press this button to increase or decrease
volume level.
7. SEL Button
Press this button to choose sound feature.
8. LOUD Button
Press this button to startup LOUD function.
9. BAND-P/N Button
In radio mode, press this button to choose
band.
In VCD、DVD mode, press this button to
、
choose PAL AUTO or NTSC system.
10. LOC / RDM Button
In radio mode, press this button to switch
between local and direction.
In VCD、CD mode, press this key to
randomly play.
11. STOP Button
Press this button to stop playing.
12. PLAY / PAUSE Button
Press this button to switch between play
and pause.
In stop mode, press this button to play.
13. ST / PROG Button
In radio mode, press this button to choose
stereo or mono station.
In audio mode, it can help STOP button to
programmed play.
05

Audio setting

Click icon on setup interface to access audio setting
interface, as shown in right (PIC 1) diagram:
You can turn on or turn off the existing functions on audio
setting interface and adjust the rearview volume.

Video setting

Click icon on setup interface to access video setting
interface, as shown in right (PIC 2) diagram:
At video setting interface, you can adjust brightness,
contrast, saturation and hue of the video.

Radio setting

Click on in setting interface, input password [123456]
to enter as shown in right (PIC 3) diagram:
Touch [America 1] icon in the radio interface,
popup, click on it to choose radio region

Touch calibration

If touch calibration error occurs, you can adjust the touch coordinate by "Touch
calibration".
Click icon on setup interface, input password [888888]
to confirm to access touch calibration interface, as shown in
right (PIC 4) diagram:
Touching methods
Use touch pen to click the center of "+" icon, and move along with center of "+" icon so
as to calibrate the screen. It shall automatically save data and exit after screen calibration.
Please accurately click all positions on screen, or the accuracy of touch calibration shall
be affected.
INSTRUCTIONS
PIC 1
PIC 2
icon will
PIC 3
PIC 4
14