Touch Screen Calibration - Planet Audio P9640B User Manual

Touch screen Calibration

Please follow the below instructions to calibrate when there is no touch or
touch is not accurate.
Step 1: Press the mode button in the unit to switch to DVD mode.
Step 2: Insert a DVD disc, after DVD is loaded, press the stop button "
picture (1). in the remote short, the unit will display as show in picture (2).
Picture ( 1 )
Step 3: Press " " in the remote as show in picture (3), the unit will display as show in
picture (4).
Picture ( 3 )
Step 4: Press " " button in the remote and then quickly press "
picture (5) and you will enter the touch calibration interface as show in picture (6).
Picture ( 5 )
Step 5: Use the touch pen to touch top left corner, top right corner, down right corner,
down left corner, when the cross cursor stop at each corner, touch the center of the
cursor. Then the panel will display OK and leave the calibration interface and the unit
regained touch as show in picture (7).
" as show in
Picture ( 2 )
Picture ( 4 )
" button as show in
Picture ( 6 )
Picture ( 7 )
15
12.
After finished the calling, press this button to hang up the phone.
13.
When this is a calling coning in, press this button to answer the phone.
14.
Press this button can eject the disc.
15. Disk load slot
Opening for disks to enter or retreat.
INSTRUCTIONS
04