Automatic Needle Threader - Janome 6260QC Instruction Manual

Janome 6260QC Instruction Manual
1
1
2
3
4
www.aaasewing.com
14
3
4

Automatic Needle Threader

1 Raise the needle to its highest position by pressing
the needle Up/Down button twice.
Raise the presser foot.
Depress the needle threader knob as far as it will go.
The hook comes out through the needle eye from
behind.
Needle threader knob
1
2 Hook
2
2 Draw the thread down around the threader guide and
under the hook.
3 Threader guide
2
Release the threader knob slowly while holding the
3
thread end with your hand. A loop of the thread is
pulled up through the needle eye.
4 Thread end
4 Remove the loop from the threader and pull out the
thread end from the needle eye.
NOTES: Set the needle at the center needle drop
position when using the automatic needle
threader.
The automatic threader works well with the
threads #50-100 and needles #11-16, the blue
tipped needle as well.
Janomesewing machine
6260QC Owners Manual/ User Guide