Utility Stitches Straight Stitch; Starting To Sew; Changing Sewing Direction; Fastening The Seam/Thread Cutter - Janome 6260QC Instruction Manual

Janome 6260QC Instruction Manual
1 2
01
1
2
3
3
www.aaasewing.com
UTILITY STITCHES
Straight Stitch
3
Machine setting
Pattern
1
Foot A: Zigzag foot
2
Thread tension
3
¥

Starting to sew

Raise the presser foot and place the fabric on the
machine.
Lower the needle into the fabric where you want to start.
Lower the presser foot and start sewing.
NOTE: To fasten the beginning of the seams, sew
¥

Changing sewing direction

Stop the machine and bring the needle down into the
fabrics by pressing the needle Up/Down button.
Raise the presser foot.
Pivot the fabric around the needle to change the sewing
direction as desired.
Lower the presser foot and start sewing in a new
1
direction.
1 Needle Up/Down button
¥
Fastening the seam
1 Sew several stitches in reverse by pressing the
reverse stitch button to fasten the end of seam.
NOTE: If you use pattern #02 (Lock-a-Matic stitch),
2
2 Revers stitch button
2 Raise the presser foot and pull the fabric to the rear.
3 Draw the threads up and into the thread cutter. The
threads are cut at the proper length for starting the
next seam.
3 Thread cutter
Janomesewing machine
#1
Auto
several reverse stitches by pressing the reverse
stitch button, or use pattern #02 (Lock-a-Matic
stitch).
press the reverse stitch button once and the
machine will sew in reverse and stop
automatically.
6260QC Owners Manual/ User Guide
17