Automatic Needle Threader - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
z
x
c
e
v
www.toews.com
q
w
r

Automatic Needle Threader

NOTE:
The needle threader can be used with a #11 to #16
needle.
Thread size 50 to 90 is recommended.
Do not use thread size 30 or thicker.
Make sure the machine is locked out.
z Draw the thread through the slit q of the needle
threader. The thread should pass under the hook w.
q Slit
w Hook
x Pull the thread up and slip it between the thread cutter
and face plate from behind.
Pull the thread toward you to cut.
c Press the needle threader button e.
The needle thread will be automatically threaded to
the needle eye.
e Needle threader button
v Pull the thread loop r to take the thread end out
through the needle eye to the rear.
r Thread loop
NOTE:
• The automatic needle threader cannot be used
with the twin needle.
• If the thread is caught in the hook and the thread
loop is not formed, remove the thread from the
hook and pull it to take the thread end out through
the needle eye.
16
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide