Janome 6260QC Instruction Manual page 31

Janome 6260QC Instruction Manual
1
1
2
Step 1
Step 2
Step 3
www.aaasewing.com
2
Adjusting the buttonhole width and density
1
Adjusting the buttonhole width.
Press the plus (+) key to increase buttonhole width.
Press the minus (Ð) key to decrease buttonhole width.
The LED display shows Ò 5.0 Ó (default setting) when the
plus or minus key is pressed. The buttonhole width can
be varied from 2.5 to 7.0.
Narrow buttonhole (2.5mm wide)
1
2 Wide buttonhole (7.0mm wide)
2
Adjusting the buttonhole stitch density
Press the plus (+) key for coarser stitch.
Press the minus (Ð) key for denser stitch.
The LED display shows Ò 0.4 Ó (default setting) when the
plus or minus key is pressed. The stitch density can be
varied from 0.2 to 0.8
The LED display does not show the sewing step when
the adjusting mode is selected.
After the buttonhole sewing is finished, LED will show Ò0Ó.
#20 Knit buttonhole
Depress the foot control and the machine will start sewing
and stop automatically after buttonhole is completed.
Step 1: Sew up to the end with a straight stitch then sew
down the left row.
Step 2: Sew the front bartack.
Step 3: Sew up to the end with a straight stitch then sew
the back bartack. Sew down the right row and
stop automatically.
6260QC Owners Manual/ User Guide
Janomesewing machine
29