Blind Hem Stitch - Janome 6260QC Instruction Manual

Janome 6260QC Instruction Manual
1
15
1
1
(1)
2
3
4
7
6
www.aaasewing.com
2 3
2
1
3
(2)
4
5
(2)
(1)

Blind Hem Stitch

Machine setting
1 Pattern
Foot
2
3 Thread tension
1 Fold a hem with the wrong side up forming a
2
0.4-0.7 cm (3/16-5/16ý) allowance.
Wrong side of the fabric
1
0.4-0.7 cm (3/16-5/16ý)
2
3 Overcasting
(1) On heavy weight fabrics that ravel, the raw edge
should be overcast first.
(2) Fold the hem under the fabric as illustrated for fine or
medium fabrics.
Place the fabric so that the folded edge is next to the
2
guide on the foot. Lower the presser foot.
Adjust the needle drop position if necessary. Sew
guiding the folded edge along the guide on the foot.
Guide
4
3 Open the fabric after sewing is finished.
Right side of the fabric
5
NOTE: If the needle pierces too far left, the stitches will
show on the right side of fabric.
Adjusting the needle drop position
The needle drop position can be adjusted by pressing the
stitch width adjustment keys.
(1) Press the plus (+) key to move the needle drop
position to the left.
(2) Press the minus (Ð) key to move the needle drop
position to the right.
The LED display shows Ò 0.6 Ó that indicates a distance
between the guide and left needle drop position in milli-
meter.
NOTE: The needle drop position will move to the left or
right, but the stitch width is remained the same.
Guide
4
Left needle drop position
6
Right needle drop position
7
Janomesewing machine
#14, #15
G: Blind hem foot
Auto
6260QC Owners Manual/ User Guide
37