GE Digital Energy SG Series Installation Manual page 14

g
Openings for input and output cable connections
Fig. 3.4.1-2 Opening on top of the cabinet for input and
cables of SG Series 10 and 20 kVA
Fig. 3.4.1-4 Opening on the bottom of the cabinet for input and
output cables SG Series 10, 20, 30 and 40 kVA
Positioning of the UPS cabinet
SG Series is equipped with wheels for easy
placement of the UPS.
To make the UPS movable on wheels, the
bolts on each leg of the cabinet have to be
turned counter-clockwise, until they are free
from the floor and thus the cabinet supported
on wheels.
After having positioned the UPS at its final
location, the cabinet has to be secured by
rotating the bolts on each leg clockwise, but
the wheels must still touch the floor.
The UPS cabinet is free
standing and normally does
not require to be bolted to the
floor.
The UPS cabinet can be fixed
however to the floor by bolting
it with the supporting blocks to
the floor.
The supporting blocks can be
used in different positions (0° -
360°)
These supporting blocks are
part of the shipping package.
See Fig. 3.4.1-5.
OPM_SGS_ISG_10K_40K_0US_V010.doc
Utility input
Output Load
Battery
Utility input
Output Load
Fig. 3.4.1-5 Fixing of the UPS cabinet on the floor
14/45
Fig. 3.4.1-3 Opening on top of the cabinet for input and
SG Series
cables of
SG Series openings are provided on the
top and the bottom of the UPS for the
connection of input and output cables.
Pay attention to the position of these
openings, when choosing the placement
of the UPS.
These openings are covered with a
protective plate.
Fig. 3.4.1-4 Bolts for the regulation of the cabinet
0 - 360°
Installation Guide SG Series 10, 20, 30 & 40 kVA
GE
Battery
Utility input
Output Load
30 and 40 kVA
To lift To lower