Weber MPE 750 Turbo Marine Service Manual page 8

Service Manual
MPE 750 Turbo Marine
Closed Loop
Coolant
Coolant additive
Anti-freeze mixture
Fill quantity
Approved
coolant additives
ATTENTION
ATTENTION
Coolant additive based on ethylene glycol
Silicate- and nitrite-free. Suitable for aluminium engines.
50 % water + 50 % coolant additive
Manufacturer's fill provides frost protection up to -37 °C [-34.6 °F]
Recommended minimum frost protection up to -30 °C [-22 °F]
3,3 liters [3.5 qt (US)]
BASF Glysantin G 30
Chevron Havoline Extended Life Coolant XLC+B
Valvoline Zerex G 30
Different types of coolant should not be mixed.
Use only approved coolants for refill. The mixture
of different types of coolant can cause severe
damage to the engine.
Coolant additives protect not only against frost,
but also against corrosion and amongst other
things. Therefore, the coolant will be filled in the
specified mixture ratio the whole year round. The
mixture ratio may not be reduced by refilling.
103160_SHB_Rev2.1_080611 Page 6