Service Manual
MPE 750 Turbo Marine
Closed Loop
Engine stalls and cannot be started again
Possible cause
Lanyard not plugged in.
Defective fuse.
Too little or no fuel in the tank.
Cable harness plug connections not
plugged in or not plugged in correctly.
Spark plugs defective.
Remedy
Plug in lanyard.
Check the fuses in the cable harness.
Fill up fuel.
Check the engine for signs of leaky fuel
lines and, if necessary, have it checked by a
professional shop.
Check plug connections.
Check the spark plugs and, if necessary,
replace them. See Chapter Spark plugs.
103160_SHB_Rev2.1_080611
Page 34