Weber MPE 750 Turbo Marine Service Manual page 23

Service Manual
MPE 750 Turbo Marine
Closed Loop
Draining the coolant (continuation)
2) Loosen the screw and gaskets (2).
Both gaskets must be replaced.
Tightening torque:
40 Nm ± 10 % [29.5 ft. lb.]
3) Remove the screw
hoses (3) on both sides and drain
coolant.
Tightening torque:
3 Nm ± 10 % [2.2 ft. lb.]
Tighten the screw clamps after
one to three hours.
Assembly occurs in reverse order. Please note instructions after this
symbol
2
clamps,
3
103160_SHB_Rev2.1_080611 Page 21