Weber MPE 750 Turbo Marine Service Manual page 32

Service Manual
MPE 750 Turbo Marine
Closed Loop
Adjusting the valve play (continuation)
Replace the O-rings (9) on the
injector valves. Coat the O-rings
lightly with motor oil.
8) Mount the valve adjustment tool
(11) with two screws.
Tightening torque:
10 Nm ± 10 % [7.4 ft. lb.]
ATTENTION
9
11
The engine may not be turned over until all valve
plays of the first cylinder are adjusted.
103160_SHB_Rev2.1_080611 Page 30