Weber MPE 750 Turbo Marine Service Manual page 15

Service Manual
MPE 750 Turbo Marine
Closed Loop
Oil level check (continuation)
1) Unscrew the oil dipstick (1) from
the oil tank and wipe it clean with a
cloth.
2) Replace the oil dipstick in the oil
tank. Do not screw it in. Then
remove it again and read the oil
level.
With a motor warm from operation,
the oil level must be just below the
MAX marking.
The difference between MIN and
MAX is approx. 0.5 liter [0.53 qt
(US)].
ATTENTION
1
Underrunning the MIN marking and exceeding
the MAX marking can cause severe and, under
some circumstances, irreparable damage to the
engine.
103160_SHB_Rev2.1_080611
MAX
MIN
Page 13