5.3 Description of options
5.3.1
Night cycle
Eliminates all spin phases and adds three rinses in COTTON cycles and two rinses in SYNTHETICS
cycles.
Stops the appliance with water in the tub before the final rinse.
Switches off the buzzer (if configured)
To drain the water select a drain or spin cycle.
5.3.2
Rinse-hold
Stops the appliance with water in the tub before the final spin cycle.
Switches off the buzzer (if configured)
To drain the water select a drain or spin cycle.
5.3.3
Pre-wash
Adds a pre-wash phase at the start of the cycle with water heating to 30°C (or cold, if selected).
In COTTON and SYNTHETICS cycles, performs a short spin before passing to the washing phase.
This option cannot be selected for WOOL and HAND-WASH cycles.
5.3.4
Soak
Adds a pre-wash phase (30' duration with wool cycle movement) at the start of the cycle with water
heating at 30°C (or cold, if selected).
In COTTON and SYNTHETICS cycles, performs a short spin (impulse) before passing to the washing
phase.
Together with the delayed start option it is possible to select a soak time from 30 minutes up to 10 hours.
This option cannot be selected for WOOL and HAND-WASH cycles.
5.3.5
Stains
Adds a 5-minute motor movement phase after heating to 40°C.
Ducts water to the pre-wash/stains compartment in order to introduce the special stain-removal product.
This option cannot be selected for DELICATES, WOOL and HAND-WASH cycles.
The movements during the washing phase change from vigorous to normal.
5.3.6
Short (daily)
Modifies the structure of the washes in the COTTON and SYNTHETICS programmes in order to obtain
good washing performance with a very short cycle (optimization for small loads).
5.3.7
Very short
Modifies the structure of the COTTON, SYNTHETICS and DELICATES programmes in order to obtain
short washing times (optimization for small or lightly-soiled loads).
Reduces the number of rinse cycles (one less).
Increases the water level in the remaining two rinse cycles.
5.3.8
Economy / Energy label
Modifies the structure of the COTTON 40°/50°/60°/90° - SYNTHETIC FABRICS 50°/60° programmes in
order to reduce energy consumption.
Reduces the washing temperature in 90°/60°/50° programmes, while for the 40° programme the
temperature is increased by 4°.
Increases the duration of the wash phase.
SOI/DT 2006-11 dmm
11/39
599 38 47 87