Electrolux Washing machines with EWM 1000 PLUS Service Manual page 35

Alarm Description
E62
Overheating during washing
E66 Heating element power relay faulty
E71 Washing NTC sensor faulty
E74 Washing NTC-sensor badly positioned
E82
Error in selector reset position
E83
Error in reading selector
Communication incongruence between main
E91 PCB- display board
(versions not compatible)
Communication incongruence between main
E92 PCB- display board
(versions not compatible)
E93 Incorrect configuration of appliance
E94 Incorrect configuration of washing cycle
Communication error between microprocessor
E95
and EEPROM
Incongruence between programme selector
E97
and cycle configuration
EB1
Frequency of appliance incorrect
EB2
Voltage too high
EB3
Voltage too low
Drain filter blocked
EF1
(too long drain phase)
Overdosing of detergent
EF2
(too much foam during drain phases)
EF3
Control water intervention
E00
No alarm
SOI/DT 2006 11 dmm
Possible fault
NTC sensor faulty; heating element faulty; wiring faulty; PCB faulty.
PCB faulty; current leakage from heating element to ground.
NTC sensor faulty; wiring faulty; PCB faulty.
NTC sensor badly positioned; NTC sensor faulty; wiring faulty; PCB
faulty.
PCB faulty (Wrong configuration data). Selector, wiring
PCB faulty (Wrong configuration data). Selector, wiring
Wiring faulty; Faulty control/display board
Main PCB faulty.
Wrong control/display board;
Wrong PCB (do not correspond to the model).
Incorrect configuration data; PCB faulty.
Incorrect configuration data; PCB faulty.
PCB faulty.
Faulty PCB (Wrong configuration data).
Power supply problems (incorrect / disturbance); PCB faulty.
Power supply problems (incorrect / disturbance); PCB faulty.
Power supply problems (incorrect / disturbance); PCB faulty.
Drain tube blocked/kinked/too high;
Drain filter dirty/blocked.
Excessive detergent dosing; drain tube kinked/blocked;
Drain filter dirty/blocked.
Water leakage on the base; faulty water control device.
---
35/39
Action/machine status
Safety drain cycle – Cycle stopped
with door open
Safety drain cycle – Cycle stopped
with door open
The heating phase is skipped
The heating phase is skipped
---
Cycle cancelled
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Warning displayed at the end of cycle
(specific LED)
(specific LED)
Water drain and cycle blocked
---
599 387 47 87
Reset
OFF
OFF
Start
Start
OFF/reset
---
---
---
OFF/reset
OFF/reset
OFF/reset
OFF/reset
---
---
---
---
---
OFF/reset
---