Selecting An Audio Input; Adjusting The Volume; Muting/Unmuting The Headphones - Sennheiser RS195 Instruction Manual

Using your RS 195 headphone system

Selecting an audio input

If both analog and digital audio inputs are connected to different audio
sources, the headphone system enables you to toggle between the two
inputs.
Push the AUDIO INPUT SELECTION
connected to the digital optical input (see page 13).
Push the AUDIO INPUT SELECTION
source connected to the analog input (see page 14 and 15).

Adjusting the volume

Press the Volume + button or the Volume
volume is adjusted to the desired level. When the minimum or maxi-
mum volume setting is reached, you hear a beep in the headphones.

Muting/unmuting the headphones

Press the HDR power button
Press the HDR power button
cancel the muting.
If the headphones are muted for 15 minutes, the headphones
switch off automatically to save energy.
switch up to listen to an audio source
switch down to listen to an audio
Digital
Analog
– button repeatedly until the
Vol
to mute the headphones.
or any of the volume
Vol
+/– buttons to
RS 195 | 21