Connecting The Transmitter To An Audio Source - Sennheiser RS195 Instruction Manual

Putting the RS 195 into operation
12 | RS 195

Connecting the transmitter to an audio source

You can simultaneously connect 2 different audio sources (e.g. a TV and a
stereo hi-fi system) to the transmitter. The transmitter features a digital
as well as an analog audio input. If you connect 2 audio sources, you can
toggle between them using the
page 21).
You can also refer to the beginner's video guides on how to connect
your digital wireless headphone system to a TV at
www.sennheiser.com/how-to-videos.
Switch your audio source off before connecting the transmitter.
Check the connection options available for your audio source (audio
output, usually marked "OUT").
Select the corresponding connection cable and, if necessary, a suitable
adapter.
Depending on the connection option selected, go to the respective
chapter and follow the instructions on how to connect the transmitter
to an audio source.
Connection options available
for your audio source
A Optical (digital)
3.5 mm or 6.3 mm/ ¼"
B
jack socket (analog)
C RCA (analog)
You can purchase accessories and adapters from your local
Sennheiser partner.
AUDIO INPUT SELECTION
Connection cable
Optical digital cable
Stereo audio cable;
in case of a 6.3 mm/ ¼" jack
socket: with adapter 3.5 mm jack
socket to 6.3 mm/ ¼" jack plug
(to be ordered separately)
Stereo audio cable with adapter
3.5 mm jack socket to 2 RCA plugs
(to be ordered separately)
switch (see
Page
13
14
15