Change The Remote Access Pin Code (For D455); Charge The Handset; Check The Battery Level; What Is Standby Mode - Philips D450 User Documentation

Change the remote access
PIN code (for D455)
Note
•
This feature is available only for models with answering
machine.
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Select [Menu] > [Answ. Machine] >
[Remote access] > [Change PIN], then
press [OK] to confirm.
2
Enter the old PIN, then press [OK] to
confirm.
3
Enter the new PIN code, then press [OK]
to confirm.
4
Enter the new PIN code again, then press
[Save] to confirm.
» The setting is saved.

Charge the handset

Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear a
docking sound.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
You can activate or deactivate the docking tone
(see 'Set the docking tone' on page 23).
Your phone is now ready to use.

Check the battery level

The battery icon displays the current battery
level.
When the handset is off the
base station, the bars indicate the
battery level (full, medium and
low).
When the handset is on the base
station/charger, the bars flash until
charging is complete.
The empty battery icon flashes.
The battery is low and needs
recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.

What is standby mode?

Your phone is in standby mode when it is idle.
The handset name, date and time, and handset
number are displayed on the standby screen.
EN
9