Set The Sound Profile; Eco Mode; Name The Handset - Philips D450 User Documentation

2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.

Set the sound profile

You can set the sound in the earpiece among 3
different profiles.
1
Select [Menu] > [Phone setup] >
[Sounds] > [MySound], then press [OK]
to confirm.
2
Select a profile, then press [OK] to
confirm.
» The setting is saved.
Access the sound profile during a call
Press [Sound] for once or several times to
change the sound profile during a call.

ECO mode

The ECO mode reduces the transmission
power of the handset and base station when
you are on a call or when the phone is in
standby mode.
1
Select [Menu] > [Phone setup] > [Eco
mode], then press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO is displayed in standby mode.
Note
•
When ECO mode is set to [On], the connection
range between the handset and the base station can
be reduced.
ECO+ mode
When the ECO+ mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
24 EN
1
Select [Menu] > [Phone setup] >[ECO+
mode], then press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO+ is displayed in standby mode
after a while.
Note
•
Make sure that all the handsets registered to the base
station are D450/D455 in order to have the ECO+
feature functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to "listen" more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
The following table shows you the current
status of the handset screen with different ECO
mode and ECO+ mode settings.
ECO ECO+
Handset icon display
mode mode
[Off] [Off]
[Off] [On]
after the ECO+ mode is
activated during standby
mode .
[On] [Off]
[On] [On]
to
mode is activated in
standby mode.

Name the handset

The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
and are off.
is displayed only
is displayed.
is displayed and changed
when the ECO+