Change The Remote Access Pin Code; Charge The Handset - Philips CD695 User Manual

Set the date and time
1
Select [Menu] >
press [OK] to confirm.
2
Select [Set date]/[Set time], then press
[OK] to confirm.
3
Press the numeric buttons to enter the
date and time.
Note
•
If the time is in 12-hour format, press
or [PM].
4
Press [OK] to confirm.
Set the date and time format
1
Select [Menu] >
press [OK] to confirm.
2
Select [Date format] or [Time format].
3
to select [DD-MM-YYYY] or
Press /
[MM-DD-YYYY] as the date display, and
[12 Hours] or [24 Hours] as the time
display. Then press [OK] to confirm.
» The setting is saved.
Note
•
The date and time format setting is country dependent.
10 EN
> [Date & time], then
to select [AM]
> [Date & time], then
Change the remote access
PIN code
Note
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Select [Menu] >
[Change PIN], then press [OK] to confirm.
2
Enter the old PIN, then press [OK] to
confirm.
3
Enter the new PIN code, then press [OK]
to confirm.
4
Enter the new PIN code again, then press
[Save] to confirm.
» The setting is saved.

Charge the handset

Place the handset on the base station to charge
the handset. When the handset is placed
correctly on the base station, you hear a docking
sound.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
You can activate or deactivate the docking tone
(see 'Set the docking tone' on page 28).
Your phone is now ready to use.
> [Remote access] >