Rear Panel I/O Ports; Ps/2 Keyboad/Mouse Port - DFI HD100-H81 User Manual

Rear Panel I/O Ports

PS/2
LAN 2
LAN 1 COM 2
K/B Mouse
USB 2.0 USB 3.0 USB 2.0 COM 1
The rear panel I/O ports consist of the following:
• 1 PS/2 Keyboard/Mouse port
• 2 RJ45 LAN ports
• 4 USB 2.0 ports
• 2 USB 3.0 ports
• 2 Serial COM ports
• 1 DVI-I port
• 1 HDMI port
• Mic-in jack
• Line-in jack
• Line-out jack
Chapter 2 Hardware Installation
Chapter 2
DVI-I
Line-in
Line-out
Mic-in
HDMI
20
PS/2 Keyboard/Mouse Port
PS/2 Keyboard/Mouse
This rear I/O port is used to connect a PS/2 keyboard/mouse.
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power-on the system. To use this function:
• Jumper Setting
JP1 must be set to "2-3 On: +5V_standby". Refer to "PS/2 KB/MS Power Select" in this chapter
for more information
.
• BIOS Setting
Configure the wake-up function of PS/2 keyboard/mouse in the Advanced menu ("ACPI Power
Management Configuration" submenu) of the BIOS. Refer to the chapter 3 for more informa-
tion.
Important:
The +5V_standby power source of your power supply must support ≥720mA.
www.dfi .com