Canon imagePRESS C7000VP Series Trouble Shooting Information page 57

● Supplementary information
In case that the gears (FU6-0362/0363/0364) inside the developing drive unit broke and need
to be replaced, they have to be accessed from the front side of this machine. The following
describes the way of accessing them.
[Step1]
Remove the 2 screws and detach the developing high
voltage contact. (The cable is connected behind the
contact. So it's impossible to remove it completely.)
[Step2]
At this time, knock the hook of spring. This will prevent the spring from dropping.
Knocking the hook of spring in Step 1 will
eliminate the concern of spring dropping.
Trouble Shooting Information for C7000VP series
Page 57
Remove the 3 screws and remove the gear unit
together with the support plate.
(Be careful not to drop the spring.)
Rev. 2.0
2010/09/17