Canon imagePRESS C7000VP Series Trouble Shooting Information page 129

Appendix 1 Tracking Detection Arm Adjusting Plate Adjustment Procedure
1. Slide out the first fixing assembly.
2. Remove the 2 screws [1], and then detach the harness guide cover [2].
3. Remove the 2 screws [3], and open the wire cramps; then, release the code guide R
[4].Remove the 2 screws [3], and open the wire cramps; then, release the code guide R [4].
4. Draw mark-off lines [7] along the top edge of the pad pressure plate R[6] so that you can
know the original position of the tracking detection arm adjusting plate [5] later.
[7]
Trouble Shooting Information for C7000VP series
Page 129
[1]
[2]
[3]
[4]
[5]
[6]
Rev. 2.0
2010/09/17