E202-0001 - Canon imagePRESS C7000VP Series Trouble Shooting Information

1.12 E202-0001

 Description
There are some reported instances from the field where, upon installation of the cooling fan for
DADF-R1, a harness extending from the fan was pinched and the fuse on the Interface PCB
had an open-circuit, causing the error code E202-0001.
- E202-0001 can be displayed when an error is found during the forward trip of the HP search.
The possible cause of this error is a fault in the scanner HP sensor, the scanner motor or the
reader controller PCB.
 Field Remedy
1. When the same symptom occurs, check if the harness of the cooling fan (front/rear) has
been pinched.
2. If the harness has been pinched, suspect removal of harness covering and replace the fan
with a new one. Refer to
3. If the symptom still occurs, suspect an open-circuit of fuse on the Interface PCB and
replace the PCB with a new one.
FL2-3427 Front Fan
FL2-3426 Rear Fan
FM2-4662 Interface PCB Assembly
Appendix 2 'Fan installation
Trouble Shooting Information for C7000VP series
Page 14
procedure'.
Rev. 2.0
2010/09/17