Changing The Belt - Vax VX6 User Manual

Removing blockages from the TurboTool
Remove the rubber ring.

Changing the belt

Switch o and unplug your
vacuum cleaner. Recline
the vacuum and lie it on its
front, remove 5 screws to
release brushbar cover.
vax.com.au
vax.co.nz
Looking After Your Machine
Push both buttons to open
the turbo tool.
Remove the brushbar cover
and push the oor head
into reclined position.
Using a pair of scissors, cut any hair or
debris free from around the brushes.
Lift the brushbar out of the
oor head and remove the
drive belt.
Remove the drive belt and
any debris from the spindle.
Loop new drive belt around
the spindle rst and then
onto the brushbar. Insert the
brushbar back into oor
head and replace the
brushbar cover, insert 5
screws to secure.
12