Changing Belt And Brushbar - Vax VCU-O3C User Manual

Changing belt and brushbar

TIP: If the brushbar stops turning whilst in use, switch the machine off and clear the blockage.
Stand the vacuum upright to reset.
Lie vacuum cleaner on its back exposing
brushbar. Use a crosshead screwdriver
to remove 3 screws.
Lift to remove brushbar.
Remove and dispose of old belt.
Vax Careline: (UK) 0330 026 4275
MAINTENANCE
Remove brushbar cover from
base of vacuum cleaner.
Clean any debris from spindle
and place new belt onto spindle.
11