Air Filter Care And Cleaning - Sanyo PLV-HD10 Service Manual

Air Filter prevents dust from accumulating on surface of Projection Lens and Projection Mirror. Should Air Filter
become clogged with dust particles, it will reduce Cooling Fans' effectiveness and may result in internal heat build up
and adversely affect life of a projector.
Clean Air Filter following steps below:
Turn power off, and disconnect AC power cord from AC
1
outlet.
Pull out air filter unit from the projector.
2
Pulling up center frame of air filter top, separate air filter
3
top and sheet from air filter base.
Clean each parts with brush, vacuum cleaner or wash
4
out dust and particles.
Be sure to dry them out.
Assemble sheet, air filter top and air filter base, and
5
replace air filter unit to a projector.
CAUTION
Do not operate a projector with air filter removed.
Dust may accumulate on LCD panel and Mirror
degrading picture quality.
Do not put small parts into air Intake Vents. It may
result in malfunction of a projector.
The filter be careful and handle. The effect of the
filter runs out in case of a leak and it being broken
off.

AIR FILTER CARE AND CLEANING

AIR FILTER BASE
Caution; Assembles sheet and filter base
- 52 -
AIR FILTER UNIT
AIR FILTER TOP
SHEET