Table of Contents
Advertisement
Mechanical disassemblies
1
-6 Speaker units disassemblies.
1. Remove 4 screws-A and remove the Mounting SP-D.
2. Remove 4 screws-B and remove the Speaker-B.
3. Remove 4 screws-C and remove the Mounting SP-C.
2. Remove 4 screws-D and remove the Speaker-A.
(See Fig.1-6)
1
-7 Decoration Inlays and R/C-1 Board removal.
1. Remove screw-A and remove the R/C-1 Board.
2. Remove 2 screws-B and remove the DEC Inlay R/C-F.
3. Remove 2 screws-C and remove the DEC Inlay-A.
(See Fig.1-7)
1
-8 Speaker Grills and Nets removal.
1. The bent portion is stretched and remove the Grille SP-L,
remove the Grille SP-R from cabinet front.
2. Remove the Nets.
(See Fig.1-8)
Mark the Grills as they are removed from the Cabinet front so that
they may be reassembled in the same location from which they
were removed. Be careful of the attached direction of Grills.
Mounting SP-D
B
B
B
B
Speaker-B
Mounting SP-B
DEC Inlay R/C-F
Net
Grill SP-L
- 16 -
A
A
A
A
C
D
D
D
D
Mounting SP-C
Speaker-A
Fig.1-6
Mounting SP-A
R/C 1 Board
A
B
B
C
C
DEC Inlay A
Cabinet front
Fig.1-7
Grill SP-R
Fig.1-8
C
C
C
Net
Advertisement
Table of Contents
