Sanyo PLV-HD10 Service Manual page 42

Optical Unit disassemblies
13
Condenser lens unit removal.
-3
1. Remove 2 screws-A and remove the Condenser lens unit.
2. Remove 4 screws-B, remove the plate and remove the Condenser lens.
(See Fig.13-3, 13-3a)
Condenser-lens
unit
13
-4 Relay lens unit removal.
1. Remove 2 screws-A and remove the Relay lens unit.
2. Remove 4 screws-B, remove the plate and remove the Relay lens.
(See Fig.13-4, 13-4a)
A
A
Fig.13-3
A
A
Relay lens
unit
Fig.13-4
Flat surface
plane comes this side
Plate
B
B
B
B
* Lens should be placed as the flat surface side
comes to the Holder side.
Spherical surface
comes this side.
B
B
B
Plate
B
The printed marker comes this side.
- 42 -
Holder
Condenser lens
Fig.13-3a
Fig.13-4a
Holder
Relay lens
Spherical surface
Side View