Table of Contents
Advertisement
13
Polarizer units removal.
-5
Red and Green Polarizer Units
1. Remove 4 screws-A and remove the Polarizer units (Red,Green).
2. Remove screw-B, remove the plate(B) and remove the Polarization glass (HIN).
3. Remove 2 screws-C, remove the plates(A) and remove the Polarization glass (IN).
(See Fig.13-5, 13-5a)
Blue Polarizer unit
4. Remove 2 screws-E and remove the Blue Polarizer unit.
5. Remove screw-F, remove the plate(D) and remove the Polarization glass (HIN).
6. Remove 2 screws-G, remove the plates(C) and remove the Polarization glass (IN).
7. Remove screw-H, and remove the Temperature sensor (PTH901) unit.
(See Fig.13-5, 13-5b)
Red and Green Polarizer units
Polarization
glass (IN)
Plate (A)
Fig.13-5a
Temp. sensor unit (PTH901)
H
Polarization
glass (IN)
Plate (C)
G
Fig.13-5b
Holder
Film side
C
C
Plate (A)
Polarizer
units
Red
Blue polarizer unit
Holder
Film side
G
Plate (C)
B
Plate (B)
Polarization
glass (HIN)
Film side
Temperature sensor
A
A
A
A
(PTH901)
E
E
Green
Blue
F
Plate (D)
Polarization
glass (HIN)
Film side
- 43 -
Optical Unit disassemblies
Fig.13-5
Advertisement
Table of Contents
