Lcd Monitor And Viewfinder - JVC GY-HM200U Instructions Manual

Others
o Do not insert objects other than the memory card
into the card slot.
o Do not block the vent on the unit.
Blocking of the vent causes internal heating and
may lead to burns and fires.
Do not turn off the [POWER ON/OFF] switch
0
or remove the power cable during recording
or playback.
The camera recorder may not show stable
0
pictures for a few seconds immediately after
the power is turned on, but this is not a
malfunction.
When the video signal output terminals are not
0
in use, put on the covers to prevent damage
to the terminals.
o Do not drop this unit or subject it to strong impact
or vibration as it is a precision equipment.
o Optical performance of lens
Due to the optical performance of the lens, color
divergence phenomena (magnification
chromatic aberration) may occur at the
periphery of the image. This is not a camera
malfunction.
o Noise may appear in the image when switching
modes.
o If placed on its side, heat release efficiency will
deteriorate.
o Use the supplied AC adapter as the power
supply. Do not use the supplied AC adapter on
other devices.
o When the connectors that come with connector
covers are not in use, put on the covers to
prevent damage to the connectors.
o This camera recorder makes use of fonts by
Fontworks Inc.
o This camera recorder makes use of M+FONTS.

LCD Monitor and Viewfinder

o The LCD monitor and viewfinder screen are
manufactured using high-precision technology.
Black spots may appear on the LCD monitor and
viewfinder screen, or red, blue, and/or white
spots may not disappear. However, this is not a
malfunction and these spots are not recorded on
the SD card.
o If you use this unit continuously for a long period
of time, the characters displayed in the
viewfinder may temporarily remain on the
screen. This is not recorded on the SD card.
They will not appear after you turn the power off
and then on again.
o If you use this unit in a cold place, the images
may appear to lag on the screen, but this is not
a malfunction. Retained images are not
recorded on the SD card.
o Do not press against the surface with force or
subject it to strong impact. Doing so may
damage or break the screens.
o Noise may appear in the viewfinder when
switching between the live video and playback
images.
o Due to the characteristic of the viewfinder
display device, colors may appear on the
images when you blink your eyes. It does not
affect the recorded images, SDI output K, or
HDMI output.
Precautions for Proper Use
41